Introduction
How to use this manual
Fuel requirements
Vehicle handling instructions
Vehicle break-in process
Indicator symbols on the instrument cluster
See also:
Engine oil
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a few
minute ...
Power steering fluid
Checking the power steering fluid level
With the vehicle on level ground, check
the fluid level in the power steering reservoir
periodically. The fluid should be
between MAX and MIN marks on the ...
Electronic stability control
The Electronic Stability Control
(ESC) monitors information from
various vehicle sensors and then
compares the driver's commands
with the actual behavior of the
vehicle.
If an unstable conditi ...


