Road warning

Hazard warning flasher


Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when
approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.

Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.

• The hazard warning flasher operates whether your vehicle is running or not.

• The turn signals do not work when the hazard flasher is on.

• Care must be taken when using the hazard warning flasher while the vehicle is being towed.

    See also:

    Engine oil and oil filter
    Checking the engine oil level 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few min ...

    Using four-wheel drive
    Driving on snow- or Ice-covered roads (“4WD LOCK” for full-time 4WD operation) • Use snow tires. See “Tires” in this section for more information. • Keep an adequate distance between ...

    Steering wheel
    Power steering Power steering uses energy from the engine to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be ...