Hazard warning flasher
The hazard warning flasher causes the rear tail lights and front turn signal lights to flash on and off, which serves as a warning to other drivers to exercise caution when approaching or passing your vehicle.
To activate the flasher, depress the hazard warning flasher switch. This switch operates in any ignition switch position.
To turn the flashers off, depress the switch again.
See also:
In case of an emergency while driving
If the engine stalls at a crossroad
or crossing
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the vehicle
to a safe place.
If you ...
Instrument panel overview
1. Driver’s air bag
2. Light control / Turn signals
3. Instrument cluster
4. Wiper/Washer
5. Ignition switch
6. Steering wheel
7. Digital clock
8. Hazard
9. Audio controls (if equipped)
1 ...
Electrical circuit protection
Fuses
A vehicle’s electrical system is protected
from electrical overload damage
by fuses.
This vehicle has two fuse panels,
one located in the driver's side panel
bolster, the other in the ...