Road warning
Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.
• The hazard warning flasher operates whether your vehicle is running or not.
• The turn signals do not work when the hazard flasher is on.
• Care must be taken when using the hazard warning flasher while the vehicle is being towed.
See also:
Windshield defrosting and defogging
WARNING - Windshield
heating
Do not use the or position
during cooling operation in
extremely humid weather. The difference
between the temperature of
the outside air and the windshield
could c ...
Wipers and washers
Windshield wiper/washer
Rear window wiper/washer (if equipped)
A : Wiper speed control
· MIST/ – Single wipe
· OFF – Off
· INT – Intermittent wipe
(if equipped)
· LO – Low w ...
Engine oil
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a few
minute ...