Road warning

Hazard warning flasher


Hazard warning flasher

The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.

It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.

Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.

• The hazard warning flasher operates whether your vehicle is running or not.

• The turn signals do not work when the hazard flasher is on.

• Care must be taken when using the hazard warning flasher while the vehicle is being towed.

    See also:

    Air bag - supplemental restraint system
    * The actual air bags in the vehicle may differ from the illustration. (1) Driver’s front air bag (2) Passenger’s front air bag (3) Side impact air bag (if equipped) (4) Curtain air bag (if ...

    Transfer case (4WD)
    Checking or changing transfer case fluid Have transfer case fluid checked or changed by an Authorized Kia Dealer according to the Maintenance Schedule at the beginning of this section. Use only ...

    Fuel filler lid
    1. Stop the engine. 2. To open the fuel filler lid, pull the release lever. CAUTION To avoid injury from sharp edges, it is recommended that protective gloves be worn if there is a need to op ...