Introduction
How to use this manual
Fuel requirements
Vehicle break-in process
Indicator symbols on the instrument cluster
See also:
Warnings and indicators
Warning lights / audible indicators
Checking operation
All warning lights are checked by turning
the ignition switch ON (do not start the
engine). Any light that does not illuminate
should be che ...
If the engine will not start
If engine doesn't turn over or
turns over slowly
1. If your car has an automatic transaxle,
be sure the gear selector lever is in N
(Neutral) or P (Park) and the emergency
brake is set.
2. Check ...
Hazard warning flasher
The hazard warning flasher causes
the rear tail lights and front turn signal
lights to flash on and off, which
serves as a warning to other drivers
to exercise caution when approaching
or passi ...


