Hazard warning flasher
The hazard warning flasher causes the rear tail lights and front turn signal lights to flash on and off, which serves as a warning to other drivers to exercise caution when approaching or passing your vehicle.
To activate the flasher, depress the hazard warning flasher switch. This switch operates in any ignition switch position.
To turn the flashers off, depress the switch again.
See also:
Door locks
Operating door locks from outside
the vehicle
• Turn the key toward rear of vehicle to
unlock and toward front of vehicle to
lock.
• If you lock the driver’s door with a key,
all vehicle ...
Special driving conditions
Hazardous driving conditions
When hazardous driving conditions are
encountered such as water, snow, ice,
mud, sand, or similar hazards, follow
these suggestions:
• Drive cautiously and allow ex ...
Engine oil and oil filter
Checking the engine oil level
1. Be sure the vehicle is on level
ground.
2. Start the engine and allow it to
reach normal operating temperature.
3. Turn the engine off and wait for a
few min ...