Vehicle break-in process

No special break-in period is needed. By following a few simple precautions for the first 1,000 km (600 miles) you may add to the performance, economy and life of your vehicle.

• Do not race the engine.

• While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.

• Do not maintain a single speed for long periods of time, either fast or slow.

Varying engine speed is needed to properly break-in the engine.

• Avoid hard stops, except in emergencies, to allow the brakes to seat properly.

• Don't let the engine idle longer than 3 minutes at one time.

• Don't tow a trailer during the first 2,000 km (1,200 miles) of operation.

    See also:

    Air bag - supplemental restraint system
    * The actual air bags in the vehicle may differ from the illustration. (1) Driver’s front air bag (2) Passenger’s front air bag (3) Side impact air bag (if equipped) (4) Curtain air bag (if ...

    If you have a flat tire
    Jack and tools The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. (1) Jack handle (2) Jack (3) Wheel lu ...

    Spacious, safe and well-equipped
    Space, refinement, comfort and luxury are the hallmarks of life on board the Kia Magentis. Kia recognises that many of the people who buy or drive D-segment cars spend long hours on the road, and ...