Road warning
Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.
• The hazard warning flasher operates whether your vehicle is running or not.
• The turn signals do not work when the hazard flasher is on.
• Care must be taken when using the hazard warning flasher while the vehicle is being towed.
See also:
Under the Hood
The Forte lineup is anchored by a 2.0-liter 4-cylinder engine rated at 156
horsepower and 144 lb-ft of torque, an 18-horse improvement over the Spectra's
2.0 liter. Only the SX gets the 2.4-liter ...
Interior features
Cigarette lighter (if equipped)
For the cigarette lighter to work, the ignition
switch must be in the ACC or ON
position.
To use the cigarette lighter, push it all the
way into its socket. When ...
Comprehensive 'active' and 'passive' safety
For new Kia Rio, an all-new bodyshell was created using a higher percentage
of high-strength steel than the third-generation model, enhancing strength and
rigidity. Special attention was given to ...