Hazard warning flasher

The hazard warning flasher should be


The hazard warning flasher should be used whenever you find it necessary to stop the vehicle in a hazardous location.

When you must make such an emergency stop, always pull off the road as far as possible.

The hazard warning lights are turned on by pushing in the hazard switch. Both turn signal lights will blink. The hazard warning lights will operate even though the key is not in the ignition switch.

To turn the hazard warning lights off, push the switch again.

    See also:

    Mirrors
    Inside rearview mirror Adjust the rearview mirror to center on the view through the rear window. Make this adjustment before you start driving. WARNING: - Rear visibility Do not place objects in ...

    Four wheel drive (4WD)
    Engine power can be delivered to all front and rear wheels for maximum traction. Full-time 4WD is useful when extra traction is required on road, such as, when driving on slippery, muddy, wet, ...

    Tire specification and pressure label
    Tire specification and pressure label The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pi ...