Lubricant specifications

Recommended lubricants To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

Engine oils labeled Energy Conserving Oil are now available.

Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.

These lubricants and fluids are recommended for use in your vehicle.

*1 Refer to the recommended SAE viscosity numbers.


*1 Refer to the recommended SAE viscosity numbers.

*2 If the API service SM engine oil is not available in your country, you are able to
use API service SL.

Recommended SAE viscosity number

NOTICE
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant.

This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (starting and oil flow). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

*1. For better fuel economy, it is recommended to use the engine oil of a


*1. For better fuel economy, it is recommended to use the engine oil of a viscosity
grade SAE 5W-20 (API SM / ILSAC GF-4).

    See also:

    Vehicle certification label
    Vehicle certification label The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN). ...

    Special driving conditions
    Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: • Drive cautiously and allow ex ...

    Review
    Designed from the ground up to be a real truck and not some hopped-up, car-based mini-SUV, the Sportage sports tough ladder-frame construction, shift-on-the-fly four-wheel drive, and a Mazda-based ...