Power steering
Checking the power steering fluid
level
With the vehicle on level ground, check
the fluid level in the power steering reservoir
periodically. The fluid should be
between MAX and MIN marks on the
side of the reservoir at the normal temperature.
Before adding power steering fluid, thoroughly clean the area around the reservoir cap to prevent power steering fluid contamination.
If the level is low, add fluid to the MAX level.
In the event the power steering system requires frequent addition of fluid, the vehicle should be inspected by an authorized Kia dealer.
NOTICE
• To avoid damage to the power steering
pump, do not operate the vehicle
for prolonged periods with a low
power steering fluid level.
• Never start the engine when the reservoir tank is empty.
• When adding fluid, be careful that dirt does not get into the tank.
• Insufficient fluid can result in increased steering effort; excessive noise may also be present as the steering wheel is turned.
• The use of the non-specified fluid could reduce the effectiveness of the power steering wheel and cause damage to it.
Use only the specified power steering
fluid. (Refer to "Recommended
Lubricants" later in this section.)
Power steering hose
Check the hoses and hose connections
for leaks or damage before driving the
vehicle.
See also:
Powertrains and Performance
The 2007 Kia Sorento comes with a new 3.8-liter V6 engine that produces 262
hp and 260 pound-feet of torque. It's mated to a five-speed automatic
transmission that allows you to choose between aut ...
Keys
Record your key number
The key code number is
stamped on the bar
code tag attached to the
key set. Should you lose
your keys, this number
will enable an authorized KIA dealer to
duplicate the ...
Mirrors
Inside rearview mirror
Adjust the rearview mirror to center on
the view through the rear window. Make
this adjustment before you start driving.
WARNING: - Rear visibility
Do not place objects in ...