Drive belts
Drive belts should be checked periodically for proper tension and adjusted if necessary.
At the same time, belts should be examined for cracks, wear, fraying or other evidence of deterioration and replaced if necessary.
Belt routing should also be checked to be sure there is no interference between the belts and other parts of the engine. After a belt is replaced, the new belt should be adjusted again after two or three weeks to eliminate slack resulting from initial stretching after use.
Checking the compressor drive
belt
Have the drive belts checked in accordance
with the maintenance schedule.
See also:
Audio system
Antenna
Glass antenna (if equipped)
When the radio power switch is turned on
while the ignition key is in either the “ON”
or “ACC” position, your car will receive
both AM and FM broadca ...
Peppy Performance
Kia Forte LX and EX are powered by a 2.0-liter DOHC four-cylinder engine,
producing 156 horsepower and 144 pound-feet of torque, that features
Continuously Variable Valve Timing (CVVT) and multi-p ...
Special driving conditions
Hazardous driving conditions
When hazardous driving conditions are
encountered such as water, snow, ice,
mud, sand, or similar hazards, follow
these suggestions:
• Drive cautiously and allow ex ...