Vehicle break-in process

No special break-in period is needed. By following a few simple precautions for the first 1,000 km (600 miles) you may add to the performance, economy and life of your vehicle.

• Do not race the engine.

• Do not maintain a single speed for long periods of time, either fast or slow.

Varying engine speed is needed to properly break-in the engine.

• Avoid hard stops, except in emergencies, to allow the brakes to seat properly.

• Avoid full-throttle starts.

    See also:

    Maintenance schedule
    Chart symbols: I- Inspect these items and their related parts. If necessary, correct, clean, refill, adjust or replace. R- Replace or change L- Lubricate. (1) Refer to the lubricant and co ...

    Transfer case (4WD)
    Checking or changing transfer case fluid Have transfer case fluid checked or changed by an Authorized Kia Dealer according to the Maintenance Schedule at the beginning of this section. Use only ...

    Brake fluid
    Checking brake fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir c ...