Washer fluid

Checking the washer fluid level


Checking the washer fluid level

The reservoir is translucent so that you can check the level with a quick visual inspection.

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING:

- Coolant.

• Do not use radiator coolant or antifreeze in the washer fluid reservoir.

• Radiator coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control or damage to paint and body trim.

• Windshield washer fluid agents contain some amounts of alcohol and can be flammable under certain circumstances. Do not allow sparks or flame to contact the washer fluid or the washer fluid reservoir. Damage to the vehicle or occupants could occur.

• Windshield washer fluid is poisonous to humans and animals.

Do not drink and avoid contacting windshield washer fluid. Serious injury or death could occur.

    See also:

    Engine number
    2.4L 2.7L The engine number is stamped on the engine block as shown in the drawing. ...

    Powertrains and Performance
    The 2010 Kia Sportage can be had with one of two engines and a choice of front- or all-wheel drive. LX base models get a 2.0-liter four-cylinder that puts out 140 hp and 136 pound-feet of torque. ...

    Engine oil
    Checking the engine oil level 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minute ...