Engine oil

Checking the engine oil level


Checking the engine oil level

1. Be sure the vehicle is on level ground.

2. Start the engine and allow it to reach normal operating temperature.

3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan.

4. Pull the dipstick out, wipe it clean, and re-insert it fully.

WARNING:

- Radiator hose Be very careful not to touch the radiator hose when checking or adding the engine oil as it may be hot enough to burn you.

5. Pull the dipstick out again and check the level. The level should be between F and L.

CAUTION:


Do not overfill with engine oil.

Engine damage may result.

If it is near or at L, add enough oil to bring


If it is near or at L, add enough oil to bring the level to F. Do not overfill.

Use a funnel to help prevent oil from being spilled on engine components.

Use only the specified engine oil. (Refer to “Recommended lubricants and capacities” in section 8.)

Changing the engine oil and filter

Have engine oil and filter changed by an authorized KIA dealer according to the Maintenance Schedule at the beginning of this section.

WARNING:


Used engine oil may cause irritation or cancer of the skin if left in contact with the skin for prolonged periods of time. Used engine oil contains chemicals that have caused cancer in laboratory animals.

Always protect your skin by washing your hands thoroughly with soap and warm water as soon as possible after handling used oil.

    See also:

    Trailer towing
    We do not recommend using this vehicle for trailer towing. ...

    Electrical circuit protection
    Fuses A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has two fuse panels, one located in the driver's side panel bolster, the other in the ...

    Seats
    Driver’s seat (1) Seat adjustment, forward / backward (2) Seatback recliner (3) Seat adjustment, height* (4) Seat heater switch* (5) Headrest adjustment Front passenger seat (6) Seat adjust ...