Road warning

Hazard warning flasher


Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.

It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.

Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.

• The hazard warning flasher operates whether your vehicle is running or not.

• The turn signals do not work when the hazard flasher is on.

• Care must be taken when using the hazard warning flasher while the vehicle is being towed.

    See also:

    Interior lights
    Map light (if equipped) Type A The lights are turned ON or OFF by pressing the corresponding switch. Type B (1) Map light : The lights are turned ON or OFF by pressing the corresponding swi ...

    Overloading
    CAUTION - Vehicle weight The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR) for your vehicle are on the manufacturer's label attached to the driver's door. Exceeding ...

    Keys
    Record your key number The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized KIA dealer to duplicate the ...