Hazard warning flasher
The hazard warning flasher causes the rear tail lights and front turn signal lights to flash on and off, which serves as a warning to other drivers to exercise caution when approaching or passing your vehicle.
To activate the flasher, depress the hazard warning flasher switch. This switch operates in any ignition switch position.
To turn the flashers off, depress the switch again.
See also:
If the engine will not start
If engine doesn't turn over or
turns over slowly
1. If your car has an automatic transaxle,
be sure the shift lever is in N (Neutral)
or P (Park) and the emergency brake
is set.
2. Check the bat ...
Specifications
The specifications given here are for general information only. Although this
information was accurate at the time of printing, Kia
reserves the right to change its vehicles or their specifications ...
Overheating
If your temperature gauge indicates overheating,
if you experience a loss of
power, or if you hear a loud knocking or
pinging noise, the engine has probably
overheated. Should any of these symptom ...